Chemical Earthing

Product Details:

We are the prominent supplier and exporter of Earthing Rod mild steel copper bonded maintenance free earthing.

17mm x 3 meter Copper Bonded Rod 250 micron, CPRI tested prewelded with connection clamp on top 100mmx50mmx5mm.

Highly conductive earthing mix compound with carbon content more than 65 percent as per IS:1350(P-4/Sec-1)1974, sulphur content less than 0.4percent as per ISO 4689-3 & tested for resistivity as per IEC 62561-7 & ASTM G57-06 for the resistivity of 0.05ohms. 

Product Details:

ISG Global is considered a trusted name of the industry that is engaged in offering Copper Bonded Earth Rod. Earth Rod mild steel copper bonded maintenance free earthing. Manufactured in compliance with the existing industry guidelines, these high functionality earthing rods are easy to install and required low maintenance. The offered range is tested for its quality and flawlessness before offering to the customers. Copper Bonded Rods, Earthing Rod, Copper Grounding Rods, Ground Rods.

IS 3043 / IEEE: 80
BS: 7430
IEC: 60364 - 5
IEC: 62561 - 7
ASTM: G57 - 06


Features :-

• Low maintenance
• Corrosion resistant
• Easy to install

Additional Information:

• Item Code: CBR07

Product Details:

Owing to the fine raw materials used in its making, the offered Copper Earthing Electrode is one of the best in its league. Manufactured as per the set industrial norms, the quality of these electrodes is always maintained. This copper earthing electrode is known for its high resistance to corrosion and high conductivity and made available by us at reasonable rates. Copper Earthing Electrode, Earthing Electrodes.


Features :

• Used for protection against electrical transients
• Highly efficient
• High functionality

Application:

• Lightning Arrester Earthing
• Oil Refineries & pump stations
• Residential
• Heavy Industrial
• Commercial
• Remote & Central Office Digital Switches

Model Overview:

Product Details:

We are the prominent supplier and exporter of Maintenance Free Chemical Earthing Electrode. Gel Earthing Electrodes, Chemical Earthing Electrode, Earthing Electrodes.

Applications :-

• Tele communication Towers & Microwave antennas
• Transmission & Distribution System
• Bank, ATM, Hospitals, Railway, Airport, Military, and Defense Installations
• Substations & Power Generators
• Lightening Arrestor Earthing
• Computer & Data Processing Centers
• Transformer Neutral Earthing
• Heavy Industries
• Food Processing & Water Treatment Plants
• Oil Refineries & Pump Stations
• Data centers, telecom, and broadcasters Process control and automation
• Remote & Central Office Digital Switches
• Petrochemical, LNG, and nuclear facilities

Product Details:

We are engaged in the manufacture and export of Chemical Earthing Electrical. That is easy to install and requires minimum maintenance. The offered Product helps in ensuring the durability of electrical and electronic components. Owing to high corrosion resistance, longer functional life and optimum usage, the proffered range is vastly demanded in the market. Earthing Set, Earthing Electrodes, Earthing Chemicals.

IS 3043 / IEEE: 80
BS: 7430
IEC: 60364 - 5
IEC: 62561 - 7
ASTM: G57 - 06

Features :-

• Easy to install
• Minimal maintenance
• Optimum usage

Product Details:

Electrogrip EGTEK21 :

We are manufacturer and supplier of Electrogrip EGTEK21 like Pre-welded Copper Bonded Rod, Earth Enhancing Compound, Earth Pit Cover And Conductive Gel.

Copper Bonded Rod is pre-welded with a connection clamp made of steel plate with 4 connection point.

Hydroscopic Conductive Gel is used to make a proper pit prior to the installation of electrode & Backfilling Compound.

Hygroscopic Conductive Gel is used to prepare the pit. Carbonaceous backfill compound is used with the electrode. The backfill compound is electrically conductive through flow of electrons (like in metals) and is not dependent on moisture. Electrogrip BFC is tested as per IEC 62561-7 and ASTM G57-06 for resistivity of 0.244 ohm-meter from National Test house (Govt. of India).

Readymade HDPP/HDPE Earth Pit Chamber with 4 output for accessing wire & strips. Light weight, Easy to Handle, Easy to install. Lockable from Top. The cover is tested at national Test House (Govt. of India) for a load bearing capasity of 8.89 tonnes.
NOTE: 17mm x 3 meter Copper Bonded Rod 250 micron, CPRI tested prewelded with connection clamp on top 100mmx50mmx5mm

Highly conductive earthing mix compound with carbon content more than 65 percent as per IS:1350(P-4/Sec-1)1974, sulphur content less than 0.4percent as per ISO 4689-3 & tested for resistivity as per IEC 62561-7 & ASTM G57-06 for the resistivity of 0.05ohms.

Product Details:

Electrogrip EKTEK21 :

We are manufacturer and supplier of Electrogrip EKTEK21 like Pre-welded Copper Bonded Rod, Earth Enhancing Compound, Earth Pit Cover And Conductive Gel.

Copper Bonded Rod is pre-welded with a connection clamp made of steel plate with 4 connection point.

Hydroscopic Conductive Gel is used to make a proper pit prior to the installation of electrode & Backfilling Compound.

Hygroscopic Conductive Gel is used to prepare the pit. Carbonaceous backfill compound is iuused with the electrode. The backfill compound is electrically conductive through flow of electrons (like in metals) and is not dependent on moisture. Electrogrip BFC is tested as per IEC 62561-7 and ASTM G57-06 for resistivity of 0.244 ohm-meter from National Test house (Govt. of India).

Readymade HDPP/HDPE Earth Pit Chamber with 4 output for accessing wire & strips. Light weight, Easy to Handle, Easy to install. Lockable from Top. The cover is tested at national Test House (Govt. of India) for a load bearing capasity of 8.89 tonnes.
NOTE: 17mm x 3 meter Copper Bonded Rod 250 micron, CPRI tested prewelded with connection clamp on top 100mmx50mmx5mm

Highly conductive earthing mix compound with carbon content more than 65 percent as per IS:1350(P-4/Sec-1)1974, sulphur content less than 0.4percent as per ISO 4689-3 & tested for resistivity as per IEC 62561-7 & ASTM G57-06 for the resistivity of 0.05ohms.

Product Details:

MOQ: 10 Bag

Chemical for Earth. Environmental Free Non Corrosive Granulated/Gel Form Chemical Earth Enhancing Earthing Compound Conductivity improving minerals,hygroscopic gel conductive minerals. The offered product is widely known for creating a low resistance zone around the electrode so that the electrode output is constant.

Electrogrip BFC as per IEEE:80
Electrogrip BFC as per BS:7430
Electrogrip BFC as per IEC:60364-5
Electrogrip BFC as per IEC:62561-7
Electrogrip BFC as per ASTMG57-06
Electrogrip BFC as per IS:3043 

Features:

• Quality oriented
• Nominal rates
• Industrial standards

Additional Information:

• Item Code: BFC04

Product Details:

Chemical Compound. Environmental Free Non Corrosive Granulated/Gel Form Chemical Earth Enhancing Earthing Compound Conductivity improving minerals, Hygroscopic Gel Conductive Mineral. This moisture absorbent product is highly acclaimed among our valued patrons. Known for its low impedance and shrinkage, the whole range of high quality jam plus compounds offered by us has heaped words of intense praise among our esteemed clients.

• Electrogrip BFC as per IS:3043
• Electrogrip BFC as per IEEE:80
• Electrogrip BFC as per BS:7430
• Electrogrip BFC as per IEC:60364-5
• Electrogrip BFC as per IEC:62561-7
• Electrogrip BFC as per ASTMG57-06

Product Details:

MOQ: 10 Bag

Electrogrip Grounding Backfill Compound. It has good hydroscopic and rich conductive compound. It has property to retain the moisture for a long time. It’s not soluble in water.

Electrogrip BFC as per IEEE:80
Electrogrip BFC as per IS:3043
Electrogrip BFC as per BS:7430
Electrogrip BFC as per IEC:60364-5
Electrogrip BFC as per IEC:62561-7
Electrogrip BFC as per ASTMG57-06

Features :-

• Maximum protection
• Positives support of wear liners
• High volumetric stability
• Impact strength

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),Other

Product Details:

In electricity supply systems, an Earthing System or Grounding System is circuitry which connects parts of the electric circuit with the ground, thus defining the electric potential of the conductors relative to the Earth's conductive surface.

Product Details:

Earth Pit Covers offer total protection and inspection point to earthing system in industrial and commercial applications. Earth Pit Cover Hi Grade Heavy Duty Polypropylene,HD PVC Chamber. Environment friendly, heavy duty, weather proof and chemical resistant material of polyplastic has been sued a raw material and an auto lock facility at top is provided. The base unit of the earth pit cover has 2/4 knock-out openings for the souting/interconnecting of strips to form a GRID. It offers high mechanical strength, zero water absorption and resistant to sunlight rays. Earthing Cover, Earth Pit, FRP Cover.

Features :-

• Factory built holes for accessing strips/wires easily at two sides.
• Made of heavy duty polyethylene for extra durability.
• Resistant materials, assuring long use-life.
• Green top cap matches the environment.